THVS-1MDT-AXYZF Automatic Micro Vickers Hardness Tester
Vickers Hardness Tester
Main features:
The x-y axis automatic displacement table controlled by the built-in stepping motor is controlled by clicking through the mouse, with high positioning accuracy, good repeat accuracy, fast moving speed and high working efficiency.
Z axle auto lift, auto focus.
The software system can control the automatic carrier platform to carry out programming movement, and various measurement modes are available for selection, especially suitable for the measurement of carburizing and nitrifying depth.
All data is stored permanently and verification reports can be generated automatically Technical
The product has detailed operation video, which can be consulted, sent and viewed
Welcome to consult
Technical parameters:
|
Model |
THVS-1MDT-AXYZF |
|
Hardness tester |
|
|
Test force |
10gf (0.098N)、25gf (0.245N)、50gf (0.49N)、100gf (0.98N)、 200gf (1.96N)、300gf (2.94N)、500gf(4.9N)、1kgf (9.8N) |
|
Carried standard |
GB/T4340，ASTM E92 |
|
Minimum test unit |
0.01µm |
|
Conversion scales |
HRA、HRB、HRC、HRD、HRF、HV、HK、HBW、HR15N、HR30N、HR45N、HR15T、HR30T、HR45T |
|
Hardness measurement range |
8~2900HV |
|
Loading method |
Automatic （loading、dwell、unloading） |
|
Turret |
Automatic |
|
Measurement eyepiece |
10X |
|
Magnification of objectives |
10X(measurement)、40X(measurement)（20X optional） |
|
Dwell time |
0~99s |
|
Maximum height of specimen |
100mm |
|
Distance from the center to the outer wall of the indenter |
110mm |
|
Data output |
LCD display |
|
Data storage |
Data stored as EXCEL in the U disk |
|
Power supply |
AC220V+5%，50-60Hz |
|
Software |
|
|
Camera |
1.3 million pixels |
|
Motor |
Stepping motor |
|
Automatic sample station movement
|
The software can change the speed flexibly by moving up the x-y axis.Click any point in the interface to select the point automatically, set the starting position of the straight line and the randomly moving position, and control the arbitrary movement in 8 directions of the automatic x-y displacement platform carrier by selecting the mouse, and adjust the speed and reset automatically. |
|
Size |
100 × 100mm |
|
Max. Movement distance |
25*25mm in the X-Y direction |
|
Min. Movement distance |
1mm |
|
Movement speed |
1-10mm/sec，adjustable |
|
Repeated displacement accuracy |
Within 4um |
|
Mode setting |
The software system can control the automatic carrier platform for programming movement： 1）measurement mode（Random A） Use this mode to load and read an arbitrary point. 2)Horizontal (X-axis direction), vertical (Y-axis direction) load and read 3）Measurement mode（Line Set A） Use this mode to press and read and surface in an angular direction (zigzag movement, that is, broken line movement of the depth measurement of the hardened layer) 4）measurement （Line Set B） Use this mode for regular intervals of loading and reading. 5）Track coordinate movement and other mobile programming methods
|
|
Measurement process |
Measure one by one after all loads, while loading and measuring at the same time |
|
Indentation measurement method |
Automatic /manual |
|
Automatic measuring time |
About 0.3sec/1 indentation |
|
Hardness value correction |
It can corrected according to the standard hardness or length scale |
|
Data output |
The test report can be customized according to user requirements Through data processing software, the depth of hardened layer formed after continuous measurement of the sample can be displayed in tabular form It can easily output various measurement data, hardness value table, hardened layer depth, maximum value, average value, minimum value, etc |
